Content hub
A wealth of advice and information on VOC and SVOC analysis.
Powering the future: Advancing volatile chemical measurement in energy gases and alternative energy sources
Presented at Joint Workshop EMN, Netherlands, 2025
Measurement of PFAS in indoor air and investigation of source materials
Application Note 167
Making regulatory chemical emissions tests easier for construction products manufacturers
British Measurement and Testing Association Newsletter, Winter 2020/21
Humidifier Accessory
Supplies the Micro-Chamber/Thermal Extractor with air or gas at up to 50% relative humidity.
Micro-Chamber/Thermal Extractor – Chamber Calibration Tool
A chamber calibration tool for the 4-chamber model (M-CTE250I / M-CTE250TI) that allows users to validate their Micro-Chamber so it is optimised in terms of response and reproducibility across the chambers.
Micro-Chamber/Thermal Extactor – SPF Sample Cutter
A tool to cut samples of spray polyurethane foam and other soft materials for consistent, reproducible sample emissions testing using the micro-chamber/ thermal extractor™ (μ-CTE™)
Micro-Chamber/Thermal Extactor – Chamber Calibration Tool
A tool that enables the performance and reproducibility of the individual sampling chambers of the micro-chamber/ thermal extractor™ (μ-CTE™) to be compared, both on one system and between systems
Thermal Desorption Applications Guide: Fragrance and odour profiling
Explore
Applications Guide: Food and drink
Explore
Thermal Desorption Applications Guide: Defence and forensic
Explore
Thermal Desorption Applications Guide: Consumer environmental health
Explore
Thermal Desorption Applications Guide: Automotive studies
Explore
μ-CTE SPF Sample Cutter
This product enables consistent sections of spray polyurethane foam (SPF) to be prepared, ready for emissions sampling using the µ-CTE™.
Testing chemical emissions from construction materials and other everyday products
How to meet the ‘green chemistry’ challenge and make the most of this market opportunity.
Micro-Chamber/Thermal Extractor
A stand-alone unit for rapid sampling of chemical vapours.
Essential guide to analysing e-cigarettes, tobacco & related products
Explore
Micro-Chamber/Thermal Extractor
Explore
Correlating consumer sensory experience of apple aroma with VOC profiles acquired by automated TD–GC–MS
Application Note 250
Tackling major challenges in air monitoring and emissions from materials
Flemish Institute for Technological Research
University of Warwick – Disease diagnosis
Explore
How to collect a sample using the Micro-Chamber Thermal Extractor
Explore
How to use the calibration tools for the Micro-Chamber/Thermal Extractor
Explore
How to use the Micro-Chamber/Thermal Extractor SPF cutter
Explore
Microchamber sampling and TD–GC–MS analysis of chemical emissions from spray polyurethane foam (SPF) in accordance with ASTM D8142
Application Note 130
